• Maximum depth 100 m (secured with 3 O-rings)
• Charging control: digital protection against overcharging and overheating
• Color temperature 6500K
• Light source: 1 x Cree HP50.2 LED (2500 lumens)
• Function switch: button, light dimming 100%/50%/SOS
• Adjustable beam angle from 5° to 70° by twisting the head
• Made of anodized aircraft-grade aluminum
• Tempered glass lens
• Burn time: approx. 90 minutes at 100% power, approx. 180 min at 50% power
• Battery level indicator (green, yellow, red)
• Dimensions: length approx. 20 cm, head diameter approx. 5 cm, handle diameter approx. 3.5 cm
• Weight with battery: approx. 496 g,

• Shark torch
• zippered case
• lanyard
• micro USB charging cable

FUNCTION SWITCH

Press the button once = 100%, twice = 50%, three times = SOS. If you press the button again, the torch will turn off. The power button is also a battery level indicator (green = 100%-70%, yellow = 70%-40%, red = 40%-5%). When the battery level reaches 5%, a strobe light will activate, flashing every 20 seconds for at least 10 seconds – then the torch will turn off before the battery reaches 1% to prevent deep discharge.

CHARGING

• Connect the micro USB cable to the charging port at the back of the torch, just unscrew the cap.
• Connect the USB cable to a charging device. While charging, the LED indicator will be red.
• When the LED turns green, the battery is fully charged.
• Charging time depends on the charging method – via USB cable or wall adapter.

MAINTENANCE

After each dive in salt water, rinse the torch with fresh water, then dry it with a lint-free cloth or compressed air. Do the same before changing the battery. If the glass is dirty, first wash it with fresh water, then with mild soap or window cleaner. Twice a year, clean the threads and O-rings of any debris using a lint-free cloth. To ensure water resistance, the O-rings are lubricated with silicone grease.