Atomic Aquatics M1 Sidemount Configuration Kit
A set of Atomic Aquatics M1 Monel regulators for a Sidemount configuration. The M1 regulators are factory-ready for use with nitrox up to 50% oxygen or oxygen mixtures up to 80% when following specific guidelines and oxygen-clean procedures. The cover on the second stage of the regulator is specially designed for diving in strong currents or for sea diving in high wave conditions, preventing the regulator from free-flowing due to strong currents or during rapid movement, e.g., when diving with a DPV (scooter).
In the kit, you receive:
THE MOST ATTRACTIVE WARRANTY IN DIVING
Think about 300 dives… How long will that take you?
We want divers using Atomic Aquatics regulators to feel confident – even in the most remote locations where it's hard to find a trusted service center. Every Atomic Aquatics regulator is built from the best materials that not only resist corrosion processes but also minimize the amount of maintenance required. The technologies used in regulator production allow for an extended equipment lifespan, which is why service is performed on average every 2 years.
The Atomic Aquatics M1 Monel regulator should be serviced every 2 years, or after 300 dives.
The first and only adjustable dynamic orifice (patent no. 5803073) is pressure-activated and only comes into contact with the rubber seat when the regulator is in use.
AFC (Automatic Flow Control), an Atomic patent.
- Atomic Aquatics M1 DIN Monel regulators x 2 pieces,
- PVD-coated 52mm or 63mm pressure gauge with black Tauch 360 bar dial x 2 pcs,
- 15 or 20 cm HP hose x 2 pcs,
- LP hose (for inflator or dry suit) x 1 pc,
- 210 cm hose,
- 80 cm hose,
- regulator bungee necklace,
- 110-degree angled adapter x 1 pc,
- bolt snap x 1 pc,
- regulator bag
- dedicated for technical, cave, and sidemount diving
- the first stage uses Monel, a corrosion-resistant and durable alloy suitable for use with oxygen mixtures up to 80% oxygen or with nitrox up to 50%.
- the regulator is factory-ready for use with nitrox up to 50% oxygen or oxygen mixtures up to 80% (when following specific guidelines and oxygen-clean procedures).
- the only piston first stage completely sealed from the water, which increases its resistance to freezing and protects against contamination.
- the compact first stage has two HP ports, five LP ports, and a unique "Jet Seat" piston. Ease of inhalation even at great depths and an appropriate breathing rate with a natural and comfortable delivery of the breathing gas.
- the cover on the second stage of the regulator is specially designed for diving in strong currents or for sea diving in high wave conditions, preventing the regulator from free-flowing due to strong current or during rapid movement, e.g., when diving with a DPV (scooter).
- the wide exhaust deflector has been widened to allow for even better visibility (splitting the bubble stream).
- designed for cold water diving, the first stage is protected against the influence of water and contaminants. The second stage has a thermal heatsink and a dry exhaust valve.
- the comfortable dual-silicone mouthpiece is made of an extremely soft and flexible silicone rubber (resistant to bite-through).
- AFC (Automatic Flow Control), an Atomic patent. Just enjoy the dive. No unnecessary knobs and buttons - the regulator automatically adjusts during the dive. It is the first and only regulator that responds to depth by using a Venturi effect that automatically balances performance and stability. A computer-designed vane inside the mouthpiece changes position depending on the depth to ensure continuous, natural, and effortless breathing at all depths.
- the titanium lever ensures absolute safety and reliability. This part is the key mechanical link to the air supply. Built from a patented aerospace titanium alloy, the lever is resistant to wear, material fatigue, and corrosion.
- the balanced poppet system, aerodynamically and pneumatically balanced, ensures increased airflow and ease of breathing, which means that regardless of the pressure in the cylinder, the diver will receive the same amount of air during the dive.
- the elliptical exhaust valve significantly reduces exhalation effort at depth. The oversized, high-flow valve and the shape of the diaphragm inside the second stage make every exhalation easier.
- the new seat-saving orifice that significantly extends the life of the rubber seat. Seat wear is the primary cause of leaks in the second stage and a decrease in its performance during use. The first and only adjustable dynamic orifice (patent no. 5803073) is pressure-activated and only comes into contact with the rubber seat when the regulator is in use. This orifice is made of corrosion-resistant titanium or, in the case of the M1, stainless steel.
THE MOST ATTRACTIVE WARRANTY IN DIVING
Think about 300 dives… How long will that take you?
We want divers using Atomic Aquatics regulators to feel confident – even in the most remote locations where it's hard to find a trusted service center. Every Atomic Aquatics regulator is built from the best materials that not only resist corrosion processes but also minimize the amount of maintenance required. The technologies used in regulator production allow for an extended equipment lifespan, which is why service is performed on average every 2 years.
The Atomic Aquatics M1 Monel regulator should be serviced every 2 years, or after 300 dives.
The first and only adjustable dynamic orifice (patent no. 5803073) is pressure-activated and only comes into contact with the rubber seat when the regulator is in use.
AFC (Automatic Flow Control), an Atomic patent.
Price: 9 125 PLN
Available colors
