• Maximum depth 100 m (secured by 3 O-rings)
• Battery type 1x lithium-ion battery, type 18650
• Charging indicator: digital protection against overcharging and overheating
• Color temperature 6500K
• Light source: 1 x Cree SST40 LED (chip power 1500 lumens)
• Function change button: button, dimming light 100%/50%/SOS
• Built-in overheating protection. When the lamp heats up above 55°C, it switches to 400 lumens. When the lamp cools down again, it returns to the brightest light level
• Adjustable beam angle from 5° to 70° by twisting the head of the torch
• Made of anodized Aircraft aluminum
• Tempered glass lens
• Operating time: approx. 70 minutes at 100% power, approx. 120 min at 50% power
• Optical battery status indicator (green, yellow, red)
• Dimensions: length approx. 18 cm, head diameter approx. 4.2 cm, handle diameter approx. 2.7 cm
• Weight with battery: about 302 g,

• Ray torch
• case with zipper
• hand strap
• micro USB charging cable

FUNCTION CHANGE BUTTON

Press the button once = 100%, twice = 50%, three times = SOS. If you press the button again, the torch will turn off.

CHARGING

• Connect the micro USB cable to the charging plate located at the back of the torch, just unscrew the protection.
• Connect the USB cable to the charging device. While charging, the LED on the charging plate will light up red.
• A change in the LED color to green means the battery is fully charged.
• Charging time depends on the charging method – via USB cable or connection to a socket.

MAINTENANCE

After each dive in salt water, rinse the torch with fresh water, then dry it with a lint-free cloth or compressed air. Do the same before changing the battery. If the glass is dirty, first wash it with fresh water and then with mild soap or window cleaner. Twice a year, remove contaminants from the threads and O-rings using a lint-free cloth. To ensure water resistance, the O-rings are lubricated with silicone gel.